ABSTRACT
Sensor nodes in many Wireless Body Area Network (WBAN) architectures are supposed to deliver sensed data to a gateway node on the body. To satisfy the data delivery requirements, the network needs to adapt itself to the changes in connection status of the body nodes to the gateway. As a prerequisite, Link Quality Estimation (LQE) needs to be done to detect the connection status of the nodes. The quality of links in WBANs is highly time-varying. The LQE technique should be agile to react fast to such link quality dynamics while avoiding frequent fluctuations to reduce the network adaptation overhead. In this paper, we present an empirical study on using different LQE methods for detecting the connection status of body nodes to the gateway in WBANs. A set of experiments using 16 wireless motes deployed on a body are performed to log the behavior of the wireless links. We explore the trade-offs made by each LQE method in terms of agility, stability, and reliability in detecting connection changes by analyzing the experimental data. Moreover, different LQE methods are used in an adaptive multi-hop WBAN mechanism, as a case study, and their impact on the Quality-of-Services (QoS) are investigated.
- N. Baccour et al, "Radio link quality estimation in wireless sensor networks: a survey," ACM Trans. Sen. Netw. (TOSN), vol. 8, no. 4, 2012. Google ScholarDigital Library
- M. Nabi, M. Geilen, and T. Basten, "On-demand data forwarding for automatic adaptation of data propagation in WBANs," in Proc. IEEE Communications Society Conf. on Sensor, Mesh and Ad Hoc Communications and Networks (SECON). IEEE, 2012, pp. 250--258.Google Scholar
- C. Otto et al, "System architecture of a wireless body area sensor network for ubiquitous health monitoring," in Journal of Mobile Multimedia, vol. 1. Rinton Press, 2006, pp. 307--326. Google ScholarDigital Library
- A. Marinkovic et al, "Energy-efficient low duty cycle MAC protocol for wireless body area networks," IEEE Transactions on Information Technology in Biomedicine (TITB), vol. 13, no. 6, pp. 915--925, 2009. Google ScholarDigital Library
- K. Shashi Prabh and J.-H. Hauer, "Opportunistic packet scheduling in body area networks," in Proc. of the 8th European Conf. on Wireless Sensor Networks (EWSN). Springer-Verlag, 2011, pp. 114--129. Google ScholarDigital Library
- M. Quwaider and S. Biswas, "Probabilistic routing in on-body sensor networks with postural disconnections," in Proc. 7th ACM MobiWAC. ACM, 2009, pp. 149--158. Google ScholarDigital Library
- M. Nabi et al, "A robust protocol stack for multi-hop wireless body area networks with transmit power adaptation," in Proc. 5th Int'l Conf. on Body Area Networks (BodyNets). ICST, 2010. Google ScholarDigital Library
- D. Smith, L. Hanlen, and D. Miniutti, "Transmit power control for wireless body area networks using novel channel prediction," in Proc. Wireless Communications and Networking Conference (WCNC). IEEE, 2012, pp. 684--688.Google ScholarCross Ref
- N. Baccour et al, "A comparative simulation study of link quality estimators in wireless sensor networks," in Proc. IEEE Symposium on Modeling, Analysis and Simulation of Computer and Telecommunication Systems (MASCOTS). IEEE, 2009, pp. 1--10.Google Scholar
- R. Fonseca et al, "Four bit wireless link estimation," in Proc. Sixth Workshop on Hot Topics in Networks (HotNets VI), 2007.Google Scholar
- "NORDIC Semiconductor. nRF24L01 data sheet, 2007."Google Scholar
- A. Cerpa et al, "Temporal properties of low power wireless links: modeling and implications on multi-hop routing," in Proc. ACM symposium on Mobile ad hoc networking and computing (MobiHoc). ACM, 2005. Google ScholarDigital Library
- D. Lal et al, "Measurement and characterization of link quality metrics in energy constrained wireless sensor networks," in Proc. IEEE Global Telecommunications Conference (GLOBECOM). IEEE, 2003.Google ScholarCross Ref
- D. Couto, D. Aguayo, J. Bicket, and R. Morris, "A highthroughput path metric for multi-hop wireless routing," in Proc. 9th Int'l Conf. on Mobile computing and networking (MobiCom). ACM, 2003. Google ScholarDigital Library
- A. Woo and D. Culler, "Evaluation of efficient link reliability estimators for low-power wireless networks," EECS Department, University of California, Berkeley, Tech. Rep. UCB/CSD-03-1270, 2003. {Online}. Available: http://www.eecs.berkeley.edu/Pubs/TechRpts/2003/6239.htmlGoogle Scholar
- H. Lee, A. Cerpa, and P. Levis, "Improving wireless simulation through noise modeling," in Proc. Int'l Conf. on Embedded networked sensor systems (SenSys). ACM, 2007.Google Scholar
- P. Levis et al, "TOSSIM: accurate and scalable simulation of entire tinyos applications," in Proc. Int'l Conf. on Embedded networked sensor systems (SenSys). ACM, 2003. Google ScholarDigital Library
- F. van der Wateren, "The art of developing WSN applications with MyriaNed," Chess Company, the Netherlands, Tech. report, 2008.Google Scholar
Index Terms
- An empirical study of link quality estimation techniques for disconnection detection in WBANs
Recommendations
Radio link quality estimation in wireless sensor networks: A survey
Radio link quality estimation in Wireless Sensor Networks (WSNs) has a fundamental impact on the network performance and also affects the design of higher-layer protocols. Therefore, for about a decade, it has been attracting a vast array of research ...
Real-time link quality estimation for industrial wireless sensor networks using dedicated nodes
Adaptive mechanisms, such as dynamic channel allocation or adaptive routing, are used to deal with the variations in the link quality of Wireless Sensor Networks (WSN). In both cases, the first step is to estimate the link quality, so that the network ...
Link Quality Estimation for Adaptive Data Streaming in WSN
In an industrial environment, reliable data transmission between wireless sensor nodes is a challenging factor, because the link quality is constantly degraded by industrial EM noise and inter-technology interference. Data loss as a result of massive ...
Comments