ABSTRACT
This paper introduces a wireless phase calibration algorithm that can be applied on cheap commercial off-the-shelf (COTS) radio frequency identification (RFID) system and auto acquire an accurate radio frequency (RF) phase information without any offline training. The key observation is that the raw phase measurements even measured form different RFID tags contain a same set of unknown phase errors. With enough tags' phase measurements, we can determine all the unknown phase errors, since the number of known phase measurements is much larger than the number of unknown phase errors. Real-world experimental results demonstrate the effectiveness of the proposed method.
- R. O. Schmidt. Multiple emitter location and signal parameter estimation. IEEE Trans. on Antennas and Propagation, 34(3):276--280, 1986.Google ScholarCross Ref
- J. Wang, D. Vasisht, and D. Katabi. Rf-idraw: virtual touch screen in the air using rf signals. In Proc. ACM SIGCOMM, pages 235--246, 2014. Google ScholarDigital Library
- J. Xiong and K. Jamieson. Arraytrack: a fine-grained indoor location system. In Proc. USENIX NSDI, pages 71--84, 2013. Google ScholarDigital Library
- L. Yang, Y. Chen, X.-Y. Li, C. Xiao, M. Li, and Y. Liu. Tagoram: real-time tracking of mobile rfid tags to high precision using cots devices. In Proc. ACM MobiCom, pages 237--248, 2014. Google ScholarDigital Library
Index Terms
- Low-cost wireless phase calibration that works on COTS RFID systems: poster
Recommendations
Privacy protection for low-cost RFID tags in IoT systems
CFI '12: Proceedings of the 7th International Conference on Future Internet TechnologiesRFID technologies in IoT systems enable to recognize animate or inanimate objects via radio frequency signals. However, RFID has several privacy problems such as object tracking by reading and tracking the ID transmitted from the RFID-tag. To solve such ...
Security and Privacy on Authentication Protocol for Low-Cost RFID
Computational Intelligence and SecurityThe Radio Frequency Identification (RFID) is an automatic identification system, relying on storing and remotely retrieving data about objects we want to manage using devices called RFID tag. Even though RFID system is widely used for industrial and ...
A New Ultralightweight RFID Protocol for Low-Cost Tags: R$$^{2}$$2AP
Several ultralightweight radio frequency identification (RFID) authentication protocols have been proposed in recent years. However, all of these protocols are reported later that they are vulnerable to various kinds of attacks (such as replay attack, de-...
Comments